If your printer isn't showing up when you try to add it, the two devices likely aren't on the same network, or the printer's discovery settings are off.
Confirm the printer and computer share the same network, enable network discovery, and restart both devices before searching again.
Common Reasons my computer find my printer
Network discovery turned off
Windows and macOS both have a network discovery toggle that can silently prevent devices from finding each other.
Different networks
The printer may be connected to a different WiFi band, guest network, or even a neighboring network.
Outdated printer software
Missing drivers or an outdated printer utility can prevent the "add printer" search from succeeding.
A sleeping printer
Some printers stop broadcasting their presence on the network while in deep sleep mode.
Quick Checks Before Troubleshooting
- Wake the printer by pressing a button on it before searching again.
- Confirm network discovery is enabled in your computer's network settings.
- Try adding the printer using its IP address directly instead of automatic search.
1. Enable Network Discovery
On Windows, turn on network discovery in Network & Sharing settings; on Mac, ensure the printer sharing preference is active.
2. Confirm Matching Networks
Check that both devices show the exact same WiFi network name.
3. Add the Printer by IP Address
Find the printer's IP from its own settings menu and add it manually using that address.
4. Update Printer Software
Install the latest driver and utility package for your printer model.
5. Restart Both Devices
A fresh restart clears cached network state that may be blocking discovery.
What If It's Still Not Fixed?
If you've worked through every step above and the problem continues, it's worth checking a nearby cause rather than repeating the same steps. The guides below cover the most common related issues.
Frequently Asked Questions
People Also Ask
-
Remove and reinsert the new cartridge firmly, then power cycle the printer so it re-reads the ink level chip. Read the full guide →
-
Confirm the printer's current IP address from its own menu, then add it manually if automatic network search fails. Read the full guide →
-
Clean the feed rollers, confirm the paper guides are snug against the stack, and check that the tray is inserted fully. Read the full guide →
-
Try a different USB cable and port, and check Device Manager for a warning icon that points to a driver issue. Read the full guide →